While attributes can be modified during placement, keep in mind that these will become the default settings for further placement. Press the X or Y keys to mirror the harness connector along the X-axis or Y-axis respectively.Press the Spacebar to rotate the harness connector counterclockwise or Shift+Spacebar for clockwise rotation.Press the Alt key to constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement.Press the Tab key to open the Inspector panel in which properties for the harness connector can be changed on the fly.Continue to place other harness connectors or right-click or press Esc to exit placement mode.Īdditional actions that can be performed during placement while the harness connector is still floating on the cursor and before its tip is anchored are:.Move the cursor to adjust the size of the harness connector, then click or press Enter to anchor the corner and complete placement of the harness connector.Click or press Enter to anchor the tip of the harness connector.Placement is made by performing the following sequence of actions: If the definition is not locked, the changes will not be saved since the software manages the Harness Definition Files automatically based on graphical instances of Harnesses.Īfter launching the command, the cursor will change to a cross-hair and you will enter harness connector placement mode. Harness Connectors defined textually require the Locked syntax.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |